The HAL-EMG-EXT-12W-2L Hazardous Area Location Emergency Exit Light Bug Eyes with back up emergency battery from Larson Electronics is rated Class 1 Division II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must. The HAL-EMG-EXT-12W-2L is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90+ minutes or until power is restored. Once power is restored, a built in charger will return the unit to a fully charged state within acceptable UL time limits. This hazardous area location emergency lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90+ minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur.

The Larson Electronics HAL-48-33W-LED is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 listed for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. The HAL-48-33W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

The Larson Electronics HAL-48-33W-LED-1227 is a high voltage hazardous location lighting solution approved for Class 1 Division 2 environments and 1598 compliant for use in wet locations. This powerful 46.88" long LED strip light produces 2416 lumens, operates from 120 to 277 VAC, and is suitable for a variety of applications. The HAL-48-33W-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance is required. This explosion proof light can be operated with voltages ranging from 120 to 277 and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 46.88" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

The Larson Electronics HAL-24-16W-LED is a low voltage explosion proof lighting solution approved for Class 1 Division 2 environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. The HAL-24-16W-LED is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where Class 1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current (choose below) and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

The Larson Electronics HAL-13-8W-LED is a low voltage hazardous location lighting solution approved for Class1 Division 2 environments and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 442 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. The HAL-13-8W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This low voltage hazardous area light can be operated with either 12 or 24 volt DC (choose below) current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.

The Larson Electronics HAL-36-25W-LED is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 listed for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 12 or 24 VDC, and is suitable for a variety of applications. The HAL-36-25W-LED is designed to provide a high output and ruggedly durable lighting solution for applications where Class1 Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

The Larson Electronics HAL-13-8W-LED-1227 is a low voltage hazardous location lighting solution approved for Class 1 Division 2 environments and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 442 lumens, operates on 120-240 VAC with a step down transformer and is suitable for a variety of applications. The HAL-13-8W-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This low voltage hazardous area light can be operated with 120-240 volt AC current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.

The Larson Electronics HAL-36-25W-LED-1227 is a low profile hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 120 to 240 VAC, and is suitable for a variety of applications. The HAL-36-25W-LED-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This explosion proof light can be powered from 120-240V AC power sources and includes 6 feet of SOOW cable terminated in a standard 5-15 explosion proof plug. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 36" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

The Larson Electronics HAL-24-16W-LED-1227 is a low voltage explosion proof lighting solution approved for Class 1 Division 2 environments and ETL 1598 compliant for use in wet locations. This powerful 24.9" long LED strip light produces 1208 lumens, operates from 120-240 VAC, and is suitable for a variety of applications. The HAL-24-16W-LED-1227 is designed to provide a high output and ruggedly durable hazardous area lighting solution for applications where Class 1 Division 2 compliance is required. This explosion proof linear strip light can be operated on 120 to 240 volt AC voltages and includes 6 feet of SOOW cable and is terminated in a 5-15 explosion proof straight blade plug. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 24.9" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.

Keine bereitgestellt