Pressure vent for storage tanks, limits pressure within tank. Welds directly into tank shell with options of aluminium, mild steel and stainless steel with nitrile, viton or PTFE seals.

Parking adaptor for vapour recovery couplers to ensure vapour recovery hose is safely and securely stowed. 4" male camlock with rear mounting plate. Mounting for M30 proximity sensor provided.

100mm butterfly valve to fit between 4" TTMA flanges, with 4 locking positions. Cast aluminium body with Viton seal that is also used to seal flange faces. Valve can be fitted with a manual handle, position locking tab only or a pneumatic actuator.

Manifold valve, air operated for bottom loading, discharge and bolt-up modular assembly system. With open/closed indicator. Mounts via 100mm TTMA flanges.

API female camlock to male camlock (3" or 4") at 15 degree downward angle fitted with Nitrile seal.

Horizontal and drop spools are used on loading arms to provide required reach of loading arms and space vertically to allow crossover when multiple arms are in a single loading bay. Typically DN100 (4") all variations have 4" TTMA flange ends for mounting to balance assembly and swivels. Materials of construction are aluminium tube, steel tube or steel pipe. Standard lengths available from stock but any length can be made to suit application.L219A-xxxx are made from thick aluminium tube for horizontal spools.L219P-xxxx are made from standard steel pipe for horizontal spools.L219T-xxxx are made from steel tube for horizontal spools.L220A-xxxx are made from thin aluminium tube for drop spools only.xxxx indicates overall length in millimetres.

Single axial cast aluminium swivel with 100mm TTMA flange ends. Available in aviation spec Available in aviation spec and used with SRL100 swivel rotation limiter to assist aligning aviation selective couplers with selective adaptors.

Used for mounting tanks onto truck chassis. Sprung mounts allow some movement to minimIse stresses on chassis.

4" female camlock dustcap with counterbore to suit vapour selective adaptors to Australian Standard AS5602.Cap will fit any 4" male camlock but ONLY this cap will fit Liquip Vapour adaptor models VCM3-F and VCM3P, standard caps will NOT fit these models.

To allow venting of vapour to or from tank compartments while loading or unloading. Flange mounted with 90mm nominal outlet.